The original Gravedigger tires are no longer available. This kit replaces them with 4 off-road tires that are the same diameter as stock tires. Kit includes new wheels , tires, and all parts to assemble. This is not for the novice installer and is not returnable.
Rear Tire Instructions:
1. Remove screws from old rims and remove tires. Pull cotter pin from axle and remove inner wheel so there is nothing left on the axle up to the gearcase.
2. Put a small wheel driver (L2170-2249) in front of a large wheel driver (J8472-2299). Put a bolt through each of the 4 holes with the head of the bolt on the small wheel driver and a lock nut set into the large wheel driver. Use the picture below as a guide.
3. Put a hubcap onto a left or right side tire, then put both together onto the axle, locking the 4 holes in the tire into the 4 nubs of the wheel driver.
4. Install a capnut. Then press a center hubcap on to make it all look pretty.
Front Tire Instructions:
1. Remove screws from old rims and remove tires. Pull cotter pin from axle and remove inner wheel so there is nothing left on the axle up to the steering linkage.
2. Onto the front axle slide a washer, two bushings (74550-2689) back-to-back, another washer, then a small wheel driver (L2170-2249). Use the picture below as a guide.
3. Put a hubcap onto a left or right side tire, then put both together onto the axle, locking the 4 holes in the tire into the 4 nubs of the wheel driver.
4. Install a capnut. Then press a center hubcap on to make it all look pretty.
Kit includes:
2 each of K8285-2039 Right tires, K8285-2239 Left tires, J8472-2299 driver hubs.
4 each of 0801-0196 washers, 74550-2689 bushings, L2170-2249 driver hubs, .437 black capnuts.
8 each of 8-32 x 1 3/4" machine screws, 8-32 lock nuts.
Grey Hubcap Option:
4 each of K8285-2249 grey hubcaps and K8285-2189 grey center hubcaps
Chrome Hubcap Option:
4 each of L6348-6249 chrome hubcaps and L6348-6189 chrome center hubcaps
